Set Supervisor Password; Set User Password; Password On Boot - Silicon Graphics Altix XE320 User Manual

6: BIOS Settings

Set Supervisor Password

Set User Password

Password on Boot

128
When the item "Set Supervisor Password" is highlighted, press the <Enter> key. When prompted,
type the Supervisor's password in the dialogue box to set or to change the supervisor's password,
which allows access to the BIOS.
When the item "Set User Password" is highlighted, press the <Enter> key. When prompted, type
the user's password in the dialogue box to set or to change the user's password, which allows
access to the system at boot-up.
This setting enables you to require a password to be entered when the system boots up. The options
are Enabled (password required) and Disabled (password not required).
007-5466-001