Silicon Graphics Altix XE320 User Manual page 171

007-5466-001
Table A-1 BIOS Post Codes (continued)
POST Code Description
86 Re-initialize onboard I/O ports.
87 Configure Motherboard Configurable Devices (optional)
88 Initialize BIOS Data Area
89 Enable Non-Maskable Interrupts (NMIs)
8A Initialize Extended BIOS Data Area
8B Test and initialize PS/2 mouse
8C Initialize floppy controller
8F Determine number of ATA drives (optional)
90 Initialize hard-disk controllers
91 Initialize local-bus hard-disk controllers
92 Jump to UserPatch2
93 Build MPTABLE for multi-processor boards
95 Install CD ROM for boot
96 Clear huge ES segment register
97 Fix up Multi-processor table
98 1-2 Search for option ROMs and shadow if successful. (One long,
two short beeps on checksum failure)
99 Check for SMART Drive (optional)
9C Set up Power Management
9D Initialize security engine (optional)
9E Enable hardware interrupts
9F Determine number of ATA and SCSI drives
A0 Set time of day
A2 Check key lock
BIOS POST Codes
143