Check The Node Board Setup; Removing The Chassis Cover - Silicon Graphics InfiniteStorage Server 3500 User Manual

Check the Node Board Setup

Removing the Chassis Cover

!
007-5653-001
Use the following sections to open the top cover and check that each node board is properly
installed and all the connections have been made.
1. Unplug the chassis from any power source.
2. Remove the screws securing the cover to the chassis, shown in
3. Lift the top cover from the chassis.
Warning:
Except for short periods of time, do NOT operate the server without the cover
in place. The chassis cover must be in place to allow proper airflow and prevent overheating.
Check the Node Board Setup
Figure 3-6.
21