Industry Canada Notice (Canada Only); Vcci Class A Notice (Japan Only); Shielded Cables; Electrostatic Discharge - Silicon Graphics Altix XE320 User Manual

Industry Canada Notice (Canada Only)

VCCI Class A Notice (Japan Only)

Shielded Cables

Electrostatic Discharge

007-5466-001
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique német pas de perturbations radioélectriques dépassant les normes
applicables aux appareils numériques de Classe A préscrites dans le Règlement sur les
interferences radioélectriques établi par le Ministère des Communications du Canada.
The SGI Altix XE320 product is FCC compliant under test conditions that include the use of
shielded cables between the server and its peripherals. Your server and any peripherals that you
purchase from SGI have shielded cables. Shielded cables reduce the possibility of interference
with radio, television, and other devices. If you use any cables that are not from SGI, ensure that
they are shielded. Telephone cables do not require shielding.
Optional monitor cables supplied with your server system use additional filtering molded into the
cable jacket to reduce radio frequency interference. Always use the cable that is supplied with your
system. If your monitor cable becomes damaged, obtain a replacement cable from SGI.
SGI designs and tests its products to be resistant to the effects of electrostatic discharge (ESD).
ESD is a source of electromagnetic interference and can cause problems ranging from data errors
and lockups to permanent component damage.
It is important that you keep all the covers and doors, including the plastics, in place while you are
operating the server system. The shielded cables that came with the server and its peripherals
should be installed correctly, with all thumbscrews fastened securely.
Manufacturer's Regulatory Declarations
197