Table of Contents
Advertisement
3.
Unpack the System
Prepare for Setup
007-6419-002
Chapter 3
Server Installation
This chapter provides a quick setup checklist to get the SGI UV 30 server operational.
Inspect the shipping container used for the server and note if it was damaged in any way. If the
server shows damage, file a damage claim with the carrier who delivered it.
Decide on a suitable location for the rack that supports the weight, power requirements, and
environmental requirements of the server. It should be situated in a clean, dust-free environment
that is well ventilated. Avoid areas where heat, electrical noise, and electromagnetic fields are
generated. Place the server rack near a grounded power outlet. Refer to
Precautions" on page
12.
The shipping container should include two sets of rail assemblies, two rail mounting brackets and
the mounting screws that you will use to install the system into a rack.
Read this section in its entirety before you begin the installation procedure.
"Warnings and
11
Advertisement
Table of Contents
Need help?
Do you have a question about the UV 30 and is the answer not in the manual?
Questions and answers