Check The Cpus (Processors); Check The System Memory; Figure 2-10 Remove The Top Cover - Silicon Graphics Altix XE320 User Manual

2: Server Installation
2
1

Check the CPUs (processors)

Check the System Memory

22
2
1
Figure 2-10
Remove the Top Cover
You may have one or two processors installed on each node board. Each processor needs its own
heatsink. Refer to Chapter 4, "Advanced Node Board Setup," for instructions on how to install
processors and heatsinks.
Your server system is shipped with system memory installed. Make sure all DIMMs are fully
seated in their slots. For details on adding system memory, refer to Chapter 4.
007-5466-001