5. Pinch the two tabs of the power button together and slip the button out of the front of the bezel. The
spring will follow the button out of the housing.
Figure 5-30. Removing the Power Button.
To replace the power button, reverse the above steps.
5.1.15.3 Bezel Blank
To remove the bezel blank, complete the following steps:
1. Perform the preparation procedures described in Section 5.1.3.
2. Remove the system unit cover as described in Section 5.1.6.
3. Remove the front bezel as described in Section 5.1.15.1.
Compaq Deskpro 2000 5-35