Pentium-Pro Based System Board; Setting Power-On Password Jumpers - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

Pentium-Pro Based System Board

Figure 6-4. Locating Jumpers on the Pentium Pro-Based System Board

6.2.2 Setting Power-On Password Jumpers

The Power-On Password feature is enabled or disabled by moving the plug on the E6 jumper located
on the system board. The E6 jumper has three pins. The Power-On Password comes enabled by default
with the plugs on pins 5 and 6. To clear or disable the Power-On Password, move the plug to pins 6
and 7.
To set a new password, move the E6 jumper back to pins 5 and 6, restart the
computer, and reestablish your password through Security Management.
Compaq Deskpro 2000 6-5