Matrox MGA Millennium Graphics Controller - Windows 3.1
Complete the following steps to change the graphics resolution:
1. From the MGA Millennium PowerDesk group box, select the Control Panel icon.
2. Click on a Mode Setup button (1 through 4).
3. Select the appropriate display, desktop, colors, and fonts from the options
provided, then click OK.
4. Restart Windows to activate the new display options.
If you click the Use ModeSWITCH check box and restart Windows, you can switch among the
four display modes without restarting Windows every time.
Matrox MGA Millennium Graphics Controller - Windows 95
Complete the following steps to change the graphics resolution:
1. Click the Start button, and point to Properties.
2. Choose MGA Settings.
3. Select the appropriate display, desktop, colors, and fonts from the options
provided, then click OK.
4. Restart Windows to activate the new display options.
If you click the Use ModeSWITCH check box and restart Windows, you can switch among the
four display modes without restarting Windows every time.
7.1.4 Ordering Operating System Device Drivers
If you plan to run the IBM OS/2 or SCO UNIX operating system with the graphics controller, you must
install the corresponding graphics controller device drivers before attempting to use the computer. To
order appropriate device drivers, contact Compaq Customer Support.
Compaq Deskpro 2000
7-5