Isa Option Board Retainer - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

5.2.16 ISA Option Board Retainer

To remove the ISA option board retainer complete the following steps:
1. Perform the preparation procedures described in Section 5.2.3.
2. Remove the access panel (Section 5.2.6.1).
3. With the computer lying on its side, press down on the end of the retainer. The retainer is then easily
removed
Figure 5-81. Removing the ISA Option Board Retainer
To replace the retainer, reverse the above procedure.
5-90 Removal and Replacement Procedures