Compaq DESKPRO 2000 SERIES Maintenance & Service Manual page 64

Error
Code Description
3301-xx CD-ROM drive read test failed.
3305-xx CD-ROM drive seek test failed.
6600-xx ID test failed.
6605-xx Read test failed.
6608-xx Controller test failed.
6623-xx Random read test failed.
Error
Code Description
6000-xx Network ID test failed.
6014-xx Network configuration test failed.
6016-xx Network reset test failed.
6028-xx Network internal test failed.
6029-xx Network external test failed
6054-xx Network configuration test failed
6056-xx Network reset test failed
6068-xx Network internal test failed.
6069-xx Network external test failed.
6089-xx Network open test failed.
Error
Code Description
8601-xx Mouse test failed.
8602-xx Interface test failed.
2-22 Troubleshooting
Table 2-13
CD-ROM Test Error Codes
Recommended Action
The following steps apply to error codes error codes 3301-xx through 3305-xx
and 6600-xx through 6623-xx:
1. Replace the CD media and retest.
2. Verify that the speakers are connected.
3. Check and/or replace the power and signal cables and retest.
4. Replace the CD-ROM drive and retest.
Table 2-14
Network Interface Test Error Codes
Recommended Action
The following steps apply to error codes 6000-xx through 6089-xx:
1. Turn computer off then on (cold boot) and
run Computer Setup.
2. Verify test procedures.
3. Replace the network board.
4. Replace the system board.
Table 2-15
Pointing Device Test Error Codes
Recommended Action
The following steps apply to error codes 8601-xx through 8602-xx:
1. Replace with a working mouse and retest.
2. Replace the system board and retest.