Speaker - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

5.2.15 Speaker

To remove the speaker from the PC complete the following steps:
1. Perform the preparation procedures described in Section 5.2.3.
2. Remove the access panel (Section 5.2.6.1).
3. Remove the riser brace (Section 5.2.7).
4. Disconnect the speaker wire from the Business Pro Audio board or the system board.
5. Remove the speaker-retaining screw.
6. Remove the speaker from the riser brace.
Figure 5-80. Removing the Speaker
To install the speaker, reverse the above procedure.
Compaq Deskpro 2000 5-89