Cable Lock - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

5.2.5

Cable Lock

To install the cable lock provision, complete the following steps:
1. Remove one thumbscrew from the rear of the computer. Use a coin or flat-bladed screwdriver, if
needed.
2. Position the bottom part of the cable lock provision over the screw hole and install the screw
provided in the cable lock option kit.
3. Cover the screw with the top part of the cable lock provision.
4. Install a lock (not provided) to secure the top part of the cable lock provision.
Figure 5-57 . Cable Lock Provision on the Minitower Computer
To remove the cable lock provision, reverse the above procedure.
Compaq Deskpro 2000 5-63