Removing The Bezel Blank - Compaq AP200 - Professional - 128 MB RAM Reference Manual

Removing the Bezel Blank

1. Turn off the workstation and any external devices. Disconnect the
power cord from the grounded AC outlet and the network cable from
the system.
2. Remove the workstation access panel.
3. Remove the front bezel.
4. Gently pull the subpanel, with the bezel blank secured in it, away from
the front bezel. Then remove the bezel blank.
Figure 4-3.
NOTE: When replacing the subpanel, ensure that the aligning pins are in their
proper orientation.
CAUTION: Hold the subpanel straight when you pull it away from
the front bezel. Pulling the subpanel away at an angle could
damage the pins that align it within the front bezel.
Removing the bezel blank from the subpanel
Compaq Professional Workstation AP200 Reference Guide
4-5