Power Button - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

5.2.17.2 Power Button

To remove the power button, complete the following steps:
1. Perform the preparation procedures described in Section 5.2.3.
2. Remove the access panel as described in Section 5.2.6.1.
3. Remove the front bezel as described in Section 5.2.17.1.
4. Hold the front access panel in one hand with the inside surface towards you.
5. Pinch the two tabs of the power button together and slip the button out of the front of the bezel. The
spring will follow the button out of the housing.
Figure 5-83. Removing the Power Button
To replace the power button, reverse the above steps.
5-92 Removal and Replacement Procedures