Speaker - Compaq DESKPRO 2000 SERIES Maintenance & Service Manual

5.1.7

Speaker

To remove the speaker, complete the following steps:
1. Perform the preparation procedures described in Section 5.1.3.
2. Remove the system unit cover (Section 5.1.6).
3. Disconnect the speaker cable from the Business Pro Audio board.
Figure 5-6. Disconnecting the Audio Cable from the Business Pro Audio Board
4. Unsnap the speaker-retaining clip on the right side of the drive bay and remove the speaker.
Figure 5-7. Removing the Speaker
Compaq Deskpro 2000 5-9