D. 4.14 Dump/Drive/Sweep Switch - Ravo 5 Series User Manual

RAVO 5-Series

D. 4.14 Dump/Drive/Sweep switch

The Dump/Drive/Sweep switch (14) makes it possible to choose between sweeping, driving or Dumping the container.
D. 4.14.1 Dump
In the Dump position the remote control for Dumping the container is switched on.
D. 4.14.2 Drive
In the Drive position the sweeping function is switched off and the brushes and suction nozzle are stowed away under the sweeper.
D. 4.14.3 Sweeping
In the Sweep position the sweeping function is switched on.Switches 7, 5, 2, 3, 6, 16 and 17 pre-select the settings with which sweeping is to be carried
out.If the Dump/Drive/Sweep button is put in neutral, the sweeping function will be switched off and the brushes and suction nozzle will be stowed away
under the sweeper.
D. 4.15 12V connection
This socket is intended for connection of 12-volt devices with a maximum draw of10A.
D. 4.16 Suction nozzle lighting switch/3rd brush lighting (option)
With the suction nozzle lighting switch (16) it is possible to switch on the suction nozzle lighting.This is only possible if the Dump/Drive/Sweep switch (14) is set
to Sweep.It is also possible with this switch to switch on the third brush lighting (if present).
D. 4.17 Brush lighting, right/left
With this switch (17) it is possible to switch on the lighting on the left or right brush.This is only possible if the Dump/Drive/Sweep switch (14) is set to Sweep.
D. 4.18 High pressure water pump switch (option)/Swasher (option)
This switch (18) switches on the high-pressure water pump.This is only possible if the Dump/Drive/Sweep switch (14) is set to Dump.This switch (18) switches
on the swasher system.This is only possible if the Dump/Drive/Sweep switch (14) is set to Sweep.
D. 4.19 Operating light(s) (option)
This switch (19) activates the worklamps on the machine.
D. 4.19.1 Front
Moving this switch to the front position activates the worklamps at the front of the machine.Press the switch in this direction again to switch off the worklamps.
D. 4.19.2 Rear
Moving this switch to the rear position activates the worklamps at the rear of the machine.Press the switch in this direction again to switch off the worklamps.
15 April 2015 3:03 pm
99