F. 5 Cleaning Sweeper Container - Ravo 5 Series User Manual

RAVO 5-Series

F. 5 Cleaning sweeper container

The sweeper container must be thoroughly cleaned every day after sweeping and dumping.This improves the quality of the sweeping work and extends the life of the
sweeper.
NOTE
CLEAN THE MACHINE OUTSIDE IN AN AREA INTENDED FOR THIS PURPOSE.MAKE SURE THE SWEEPER IS ON A LEVEL SURFACE AND THE
CONTAINER IS NOT TILTED.
F. 5.1 Cleaning suction tube, suction nozzle (1)
• Start the sweeper's engine
• Lower the suction nozzle and brushes, open the suction nozzle valve and activate the suction fan
• Spray lots of water (low pressure) at the suction nozzle opening for at least two minutes.This thoroughly cleans the inside of the suction nozzle and suction tube
F. 5.2 Cleaning container (2)
• Stop the suction fan
• Open the rear flap and fit the safety support
• Stop the engine
• Hose down the interior surfaces of the container and interior grids with ample water (low pressure).
F. 5.3 Cleaning the first interior grid (3)
• Remove the first interior grid
• Hose down the interior grid with ample water (low pressure)
• Remove the entire grid from the container.
F. 5.4 Cleaning second interior grid (4)
• Remove the second interior grid.Use a hook
• Hose down the interior grid with ample water (low pressure)
• Spray the top of the container and the fan opening clean with ample water
• Fit both interior grids in the container in the correct manner.
F. 5.5 Cleaning pusher (5) (only for CD version)
• Extend the container dump pusher as far as it will go
• Hose down the area behind the container dump pusher with ample water directed through the inspection hatch (for at least two minutes)
• This will remove any fouling that has accumulated behind the container dump pusher
• Close the inspection hatch on the side of the container
• Retract the container dump pusher.
• Close the service door
15 April 2015 3:03 pm
243