D. 4.6 Brush Switch (With 'Independently Lifting Of Left Brush' Option) - Ravo 5 Series User Manual

RAVO 5-Series

D. 4.6 Brush switch (with 'independently lifting of left brush' option)

The brush switch (6) has three positions: option
D. 4.6.1 Position '0'/brush-drive off
The brush drive and spraywater provision are switched off.
D. 4.6.2 Position '1'/brush-drive on
The engine must be running and the Dump/Drive/Sweep switch (14) must be in the Sweep position
The left brush starts to rotate and is lowered.
D. 4.6.3 Position '2'/brush drive on and spraywater on
Switch the spraywater pump switch (3) on
The spraywater provision on the left brush and/or in the suction nozzle will start to spray (depending on the position of the spraywater pump switch).
D. 4.7 Brush speed regulator
This regulator (7) provides infinite adjustment of the rotational speed of the brushes.
WARNING
YOU MUST NOT ALLOW ANY PERSONS WITHIN THE RANGE OF THE THIRD BRUSH WHEN THIS THIRD BRUSH IS IN USE.
D. 4.8 Third brush speed regulator (option)
With this regulator (8) the rotation speed of the third brush can be continuously regulated from zero rpm/min to max.
D. 4.9 Third brush double angle adjustment switch (option)
The angle (left/right) of the third brush can be adjusted with this regulator (9).
D. 4.10 Third brush angle adjustment regulator (option)
The angle (forward/backward) of the third brush can be adjusted with this regulator (10).
D. 4.11 Third brush spraywater switch (option)
This switch (11) releases the spraywater supply to the third brush.But before you do this you must switch on the water pump (3) and the brush drive on the door
console (see Door Console Chapter).
15 April 2015 3:03 pm
95