F. 2.4 Distance To The Suction Nozzle - Ravo 5 Series User Manual

RAVO 5-Series

F. 2.4 Distance to the suction nozzle

The distance between the brushes and the suction nozzle must be correctly adjusted to prevent:
• Excessive wear to the suction nozzle (when the clearance is too small).
• A trail of dirt remaining on the road between the brushes and the suction nozzle (when the clearance is too large).
F. 2.4.1 Adjusting the distance to the suction nozzle:
• Unscrew the lock nut at position (3).
• Turn the adjusting nut (3) clockwise or anticlockwise.
• The length of the coupling shaft will then be decreased or increased, respectively.
NOTE
WHEN THE SWEEPER IS ADJUSTED CORRECTLY THE BRUSHES WILL LEAVE A PATTERN ON THE ROAD SURFACE AS SHOWN IN THE DIAGRAM
ABOVE.
15 April 2015 3:03 pm
237