E. 10 Opening Cabin Door While Sweeping With Third Brush - Ravo 5 Series User Manual

RAVO 5-Series

E. 10 Opening cabin door while sweeping with third brush

The sweeper is equipped with a safety system that stops sweeping operation as soon as either of the cabin doors is opened.To resume sweeping again after closing
the cabin door, the following steps must be taken:
E. 10.1 Resuming sweeping with third brush after opening cabin door:
• Switch the Dump/Drive/Sweep switch (1) on the dashboard panel to the centre position (Drive)The driving screen will now be active on the iSystem LED display.
• Switch the Dump/Drive/Sweep switch (1) on the dashboard panel to the Sweep position.The sweeping screen will now be active on the iSystem LED display.
• Move the switch (7) to the forward position.This will resume sweeping operation.
15 April 2015 3:03 pm
209