RAVO 5-Series
F. 5.6 Cleaning fan (6)
• Open the right-hand service door
• Attach the water hose to the suction fan cleaning fitting
• Check that there are no persons or loose objects in the container, and close the rear flap
• Start the sweeper's engine
• Lower the suction nozzle and brushes, and activate the suction fan
• Spray water through the fan cleaning fitting in the container for two minutes
• Retract the brushes and stop the suction fan
• Remove the water hose and close the service door
• Open the rear flap of the container and allow excess water to drain.
• Close the rear flap and drive the sweeper back to its parking place.
15 April 2015 3:03 pm
245