When the engine is switched off or defective the parking brake will be activated after a period of time due to pressure drop in the hydraulic system. If the machine
needs to be moved (e.g. following engine failure) the parking brake will have to be deactivated.
WARNING
ONLY DEACTIVATE THE PARKING BRAKE IN THE EVENT OF AN EMERGENCY. THE PARKING BRAKE MUST BE ACTIVATED AGAIN ONCE THE VEHICLE
HAS BEEN REPAIRED.
WARNING
ALWAYS FIT THE SAFETY STAY WHEN THE CONTAINER IS TIPPED UP.
WARNING
ALWAYS PLACE WEDGES IN FRONT OF AND BEHIND THE WHEELS OF THE SWEEPER BEFORE YOU START TO WORK WITH THE PARKING BRAKE
ON, MAKE SURE THAT THE SWEEPER IS NOT ABLE TO START DRIVING OF ITS OWN ACCORD.
The parking brake is operated by two cylinders in the engine compartment. These cylinders can be disconnected to deactivate the parking brake.
F. 12.1 Disconnecting parking brake
• Remove the two bolts (1) from the parking brake cylinders
• Insert two 100mm bolts in place of the bolts (1) and turn them inwards.