D. 2 Isystem Led Display – Sweeping - Ravo 5 Series User Manual

RAVO 5-Series
D. 2 iSystem LED display – sweeping
The iSystem LED display shows information on the current status of the sweeper.Relevant information is displayed depending on the selected sweeper mode (Dump/
Drive/Sweep).This information can include warnings, status and/or level information, speed and engine information.This section only describes the relevant
information about the 'Sweep' LED screen.The items previously discussed in connection with the 'Drive' screen are not described here.
D. 2.1 Silent indicator light (option)
The silent indicator light (1) is lit when this option is activated.
D. 2.2 Fan indicator light
The fan indicator light (2) is lit when this fan is activated.
D. 2.3 Suction nozzle indicator light
The suction nozzle indicator light (3) is lit when the nozzle is activated.
D. 2.4 Spraywater pump indicator light
The spraywater pump indicator light (4) is lit when the spraywater pump is activated.
D. 2.5 Water recirculation indicator light (option)
The water recirculation indicator light (1) is lit when this option is activated.
D. 2.6 HP water pump (option)
The HP water pump indicator light (6) is lit when this option is activated.
D. 2.7 Speedometer
The speedometer (7) shows the current driving speed of the sweeper.Digital only.
D. 2.8 Rev. counter
The rev. counter (8) indicates the engine revs.Analogue only.
D. 2.9 Ideal sweep rev range
The tachometer is labelled with the rev range (9) for optimum sweeping.Under normal conditions.
D. 2.10 Lighting
The lighting indicator (10) indicates whether the work lighting is on.Green = on.
D. 2.11 Brush washers
The brush sprayer indicator (11) indicates whether the brush sprayers are activated.Blue = on.
D. 2.12 Brush speed
The brush speed indicator (12) indicates the minimum and maximum brush speed.
15 April 2015 3:03 pm
85