RAVO 5-Series
D. 6.2 Function key S5
On the machine settings screen certain preconfigured settings can be enabled or disabled.The following settings are available:
• Brushes and suction nozzle flap raised in reverse on/off
• Suction nozzle flap raised in reverse on/off
• Worklamps rear on in reverse on/off
• Worklamps front on in transport on/off
D. 6.2.1 Operation machine settings screen
The rotation/selection knob (5) can be used to scroll between the different settings and choose from among the available options.
The exit button (6) takes you back to the selected mode (Dump/Drive/Sweep).
15 April 2015 3:03 pm
151