For proper operation of the sprayers on the sweeper it is important and necessary to clean the spraywater fine-dirt filter (1) regularly.This will prevent blockages in
the spraywater system.
F. 17.1 Cleaning/replacing the spraywater fine-dirt filter
NOTE:
THE FINE-DIRT FILTER (1) IS LOCATED AT POSITION (4) UNDER THE CHASSIS.
• Remove the filter housing (2) of the fine-dirt filter (1).
• Remove the filter (3).
• Check if the filter (3) is dirty.Clean or replace the filter (3).
• Fit the filter (3).
• Fit the filter housing (2) and tighten it by hand.