D. 10.6 Joystick - Ravo 5 Series User Manual

RAVO 5-Series

D. 10.6 Joystick

The joystick (6) has various functions:
D. 10.6.1 Lifting:
By moving the joystick (6) upwards, the brushes and the suction nozzle will be raised, the brush motors will be turned off and the supply of spraywater to
the brushes and the suction nozzle will be stopped.
If the sweeper fan, the spraywater pump and the suction nozzle sprayers are switched on, they remain active.
D. 10.6.2 Lowering:
By moving the joystick (6) downwards, the brushes and the suction nozzle will be lowered and the brush motors and the supply of spraywater to the brushes
will be switched on.
However, this is on condition that the brush switch and the spraywater pump switch are switched on.
D. 10.6.3 Slide left/right:
By moving the joystick (6) to the left or to the right the entire sweeping unit will be moved to the left or to the right over a total distance of 450 mm.The brushes
can be moved while they are rotating.
Before the brushes and suction nozzle are raised, it is recommended that the sweeping unit be slid to the middle position.
D. 10.7 Joystick, third brush (option)
The third brush can be swivelled and slid with the joystick (7) in the door console.
D. 10.8 Door console adjustment
The position of the door console can be adjusted with the three adjustment buttons (8).
15 April 2015 3:03 pm
167