D. 4.3 Spraywater Pump Switch - Ravo 5 Series User Manual

RAVO 5-Series
(with 'independent lifting of right brush' option)
D. 4.2.4 Position '0'/brush-drive off
The brush drive and spraywater provision are switched off.
D. 4.2.5 Position '1'/brush-drive on
The engine must be running, the Dump/Drive/Sweep switch (14) must be set to Sweep and the joystick for the brushes must be moved to the 'brush down'
position
The right brush moves down and starts turning.
D. 4.2.6 Position '2'/brush drive on and spraywater on
Switch the spraywater pump switch (3) on
The spraywater provision on the right brush and/or in the suction nozzle will start to spray (depending on the position of the spraywater pump switch).

D. 4.3 Spraywater pump switch

The spraywater pump switch (3) has three positions:
D. 4.3.1 Position '0'/spraywater pump off
The spraywater pump is off
D. 4.3.2 Position '1'/spraywater pump on
The engine must be running and the Dump/Drive/Sweep (14) switch must be set to Sweep
The spraywater provision to the brushes is activated.
D. 4.3.3 Position '2'/sprayers in suction nozzle
In addition to the spraywater provision to the brushes, the spraywater provision in the suction nozzle is now also switched on.
D. 4.4 Fan switch
The fan switch (4) switches on the suction fan provided the Dump/Drive/Sweep switch (14) is set to Sweep.
D. 4.5 Suction nozzle switch, raise/lower
With the raise/lower suction nozzle switch (5) the suction nozzle can be adjusted up or down independently of the brushes,e.g. to suck up large quantities of
leaves.In that case a bigger suction nozzle opening will be required.
15 April 2015 3:03 pm
93