B. 4 Scrapping The Sweeper - Ravo 5 Series User Manual

B. 4 Scrapping the sweeper

If the sweeper is being scrapped, the regulations governing waste processing should be observed, which apply in the location and at the time of scrapping.
When scrapping the sweeper, the following activities must be carried out by a certified and specialist company.
WARNING!
A NUMBER OF SYSTEMS ARE PRESSURISED BY MEANS OF ACCUMULATORS. FIRST DEPRESSURISE THESE SYSTEMS BY DEPRESSURISING THESE
ACCUMULATORS.
WARNING!
PAY ATTENTION THE ENVIRONMENT AND THE ECOSYSTEM. BEFORE DRAINING ANY LIQUID, DECIDE ON THE BEST METHOD OF DISPOSAL. ALWAYS
COMPLY WITH THE RELEVANT ENVIRONMENTAL-PROTECTION MEASURES WHEN CLEARING UP OIL, FUEL, COOLANT, BRAKE FLUID, FILTERS AND
BATTERIES.
B. 4.1 Activities to be completed
• Remove the batteries
• Depressurise the suspension system by discharging the oil pressure into a hydraulic tank
• Depressurise the accumulators for the suspension system and remove the accumulators
• Depressurise the accumulators for the braking system and remove the accumulators
• Remove all fuel from the fuel tank and the system
• Remove all hydraulic oil from the hydraulic tank and the system
• Remove the ATF oil from the ATF system
• Remove all engine oil from the engine block
• Remove all coolant from the engine and the cooling system
• Remove all the water from the water tanks.
36
RAVO 5-Series
15 April 2015 3:03 pm