D. 4 Dashboard - Ravo 5 Series User Manual

RAVO 5-Series

D. 4 Dashboard

The dashboard is situated to the left of the steering wheel on top of the central console.On the dashboard you will find all the major switches for the brushing, suction
and spray unit and the hand accelerator activation button.
NOTE
THE LAYOUT OF THE DASHBOARD CAN DIFFER DEPENDING ON THE MACHINE, TO ACCOMMODATE ANY SPECIAL OPTIONS ADDED.THE LAYOUT
DESCRIBED HERE IS THE STANDARD LAYOUT WITH THE MOST COMMON OPTIONS.THE FUNCTIONALITY OF THE SWITCHES REMAINS THE SAME
EVEN IF THEY ARE FITTED IN A DIFFERENT PLACE.
D. 4.1 Hand accelerator activation button
The operating speed of the engine can be set with the hand accelerator activation button (1) if the Dump/Drive/Sweep switch is in the Dump or Sweep position.
D. 4.2 Brush switch (with 'independently lifting of right brush' option)
The brush switch (2) has three positions:
D. 4.2.1 Position '0'/brush-drive off
The brush drive and spraywater provision are switched off.
D. 4.2.2 Position '1'/brush-drive on
The engine must be running, the Dump/Drive/Sweep switch (14) must be set to Sweep and the joystick for the brushes must be moved to the 'brush down'
position.
The brushes move down and start turning.
D. 4.2.3 Position '2'/brush drive on and spraywater on
Switch the spraywater pump switch (3) on
The spraywater provision on the brushes and/or in the suction nozzle will start to spray (depending on the position of the spraywater pump switch).
15 April 2015 3:03 pm
91