Input Check (Test Mode 03) - Oki MB760 Service Manual

3.3

Input check (Test mode 03)

The status of each input signal can be checked by pressing the [FAX] button, [COPY] button,
[SCAN] button and the digital keys in the test mode (03).
<Operation procedure>
[0][3]
[POWER]
Notes:
• Initialization is performed before the equipment enters the test mode.
• The PRINT DATA lamp blinks when the input check is running.
Refer to "Appendix" in this manual for the items to be checked and the condition of the
equipment when the buttons [A] to [H] are highlighted.
45641001TH Rev.1
[FAX]
[COPY]
[START]
or
[SCAN]
[CLEAR]
Fig. 3-5 example of display during input check
[Digital keys] (LCD ON)
[CLEAR]
Oki Data CONFIDENTIAL
[POWER] OFF/ON
(Exit)
3-7 /