Oki MB760 Service Manual page 137

[F106_1] aDI-HDD error: HDD type detection error
Classification
Other service call
Check item
Setting
HDD
[F106_2] aDI-HDD error: aDI encryption key download operation error
Classification
Other service call
Check item
Setting
45641001TH Rev.1
ADI-HDD error: HDD type detection fails.
If the error is not recovered after rebooting the equipment or no
abnormality is found on any check items for the HDD, reinstall the
system software.
• Connector check
• Harness check
• Start the equipment in the 5C mode: [5] + [C] + [POWER]
Check the file system and recover it if necessary. If the recovery fails,
replace the HDD.
If the equipment does not start in the 5C mode, also replace the HDD.
• Check that either the ADI-HDD or SATA-HDD (normal type) is
mounted.
1. Start the equipment in the 4C mode: [4] + [C] + [POWER]
2. Check the type of the HDD shown on the top left of the control panel
display "Current HDD type".
Normal status: ADI-HDD or SATA-HDD
Abnormal status: Unknown HDD
If "Unknown HDD" is displayed, reinstall the system software.
ADI-HDD error: Downloading of or consistency check for ADI- HDD
encryption key fails.
Checking of ADI-HDD encryption key status
1. Start the equipment in the 3C mode: [3] + [C] + [POWER]
2. The authentication menu is displayed. Press [OK]. (Not required in the
default setting)
3. Select "5. Key Backup Restore" and then press the [START] button.
4. Check the status of the ADI-HDD encryption key on the Key Backup
Restore Mode menu.
5. After the operation is completed, shut down the equipment by
pressing the [POWER] button.
• In case both the SRAM ADIKey and FROM ADIKey status are OK
Reinstall the system firmware.
• In case either the SRAM ADIKey or FROM ADIKey status is other than
OK.
Restore the ADI-HDD encryption key.
• In case both of the SRAM ADIKey or FROM ADIKey status are other
than OK.
Reinstall the system software.
Oki Data CONFIDENTIAL
Error item
Measures
Error item
Measures
5-54 /