Oki MB760 Service Manual page 257

Notes:
• The display of items on this screen varies depending on the types of data written
on the USB device.
Each item is displayed only when each data file is written on the USB device in
the following conditions.
• If the USB device is not recognized properly, "USB device Not detected" message
is displayed. In this case, disconnect the USB device and connect again within
3 minutes, or shut down the equipment and connect the device properly. Then
repeat the procedure from (4).
• If any of the error messages below is displayed, confirm if the data file in the USB
device is correct.
Then repeat the procedure from (4).
(6) Select the item with the digital keys.
"*" is displayed next to the selected item. Display or delete the "*" by pressing the
number of the item.
1. SYSTEM FIRMWARE(OS Data)
2. ENGINE FIRMWARE
3. SCANNER FIRMWARE
4. SYSTEM SOFTWARE (HD Data)
45641001TH Rev.1
Item
1. SYSTEM FIRMWARE
(OS Data)
2. ENGINE FIRMWARE
3. SCANNER FIRMWARE
4. SYSTEM SOFTWARE
(HD Data)
Error
number
01 Error Loadmodule
02 Machine Model Get Error
03 Copy Data with valid signature in USB Storage Checking of data file
04 Other models ROMDATA TXXXXXXXX
* The version name comes at "xxxx.xxx.x".
05 Copy Signature File in USB Storage
06 Patch and Normal package in one folder
of USB Storage
Item
O290SF0Wxxxx.tar is written. (xxxx is version.)
H291PUPWW.xxxx is written. (xxxx is version.)
H282SUPWW.xxxx is written. (xxxx is version.)
O290HD0Wxxxx.tar is written. (xxxx is version.)
Error message
Updating System firmware
Updating PU firmware
Updating SU firmware
Updating System software
Oki Data CONFIDENTIAL
Condition
Cause
Module loading failed.
Model information was
not downloaded.
failed.
Master data of other
model are stored.
Data files are not
stored in the USB
device.
When both the system
and patch update
packages are in the
USB device
Remarks
8-7 /