Writing The Data To The Download Jig (Pwa-Dwnld-Jig2) - Oki MB760 Service Manual

8.4.1

Writing the data to the download jig (PWA-DWNLD-JIG2)

The download jig (PWA-DWNLD-JIG2) is that in which the Flash ROM is mounted on the board
directly. The ROM writer adapter (PWA-DL-ADP-350) is required to write data to these Flash
ROMs. Connect the download jig with the ROM writer via ROM writer adapter to write data. For
the procedure to write data, refer to the downloading procedure, instruction manual of each
ROM writer, or other sources.
Notes:
There are two types of the ROM writer adapter. Use the proper one according to the ROM
writer to be used. Applicable type of the adapter for the ROM writer can be confirmed by the
model name indicated on the board. Confirm that the adapter is available for the ROM writer
to be used before connecting them. If an unapplied adapter is connected, the application of
the ROM writer judges it as an error and writing the data cannot be implemented. Applicable
combinations of the ROM writer and adapter are as follows.
Minato Electronics MODEL 1881XP/1881UXP
(or equivalent)
Minato Electronics MODEL 1893/1895/1931/1940
(or equivalent)
45641001TH Rev.1
[1]
[1] PC
[2] Download jig (PWA-DWNLD-JIG2)
[3] ROM writer adapter (PWA-DL-ADP-350)
[4] ROM writer
ROM writer
model 1881
[ PWA-DL-ADP-350-1881 ]
Fig.8-15
Fig.11-3
ROM writer adapter
PWA-DL-ADP-350-1881 (model 1881)
PWA-DL-ADP-350-1931-LV640 (model
1931)
model 1931
( LV650 )
[ PWA-DL-ADP-350-1931-LV640 ]
Oki Data CONFIDENTIAL
[2]
[3]
[4]
Fig.8-16
8-21 /