Oki MB760 Service Manual page 340

05/ Sub
Mode Element
08 element
08 Setting System User
Mode interface
08 Setting System User
Mode interface
08 Setting System User
Mode interface
08 Setting System User
Mode interface
08 Setting System General
Mode
08 Setting System User Card reading
Mode interface device
08 Setting System General
Mode
08 Setting System User Display setting
Mode interface
08 Setting System User Display setting
Mode interface
45641001TH Rev.1
Sub-
Item Subitem Code
code
8722
8723
8724
8725
8726
8727
8737
8738
8744
Default Acceptable
Details RAM
value value
Display method of 0 0-1 SYS Sets the display method of error if the Home Directory
"Cannot find the
Home Directory"
on the control
panel
Pop-up display 1 0-1 SYS Sets whether the pop-up dialog of confirmation for logging
of logging out of
user authentication
and department
management on
the control panel
Display setting of 1 0-1 SYS 0: Not displayed (From Address cannot be edited)
Edit From Address
button for Scan to
email
Display setting 1 0-1 SYS Sets whether the [CHANGE LANGUAGE] button
of [USER
FUNCTIONS]->
CHANGE
LANGUAGE button
Job deletion on the 0 0-1 SYS Use this code to enable the job deletion on the [Job
Job Status screen
Display of 0 0-1 SYS Switches whether the message to hold a card over the
dedicated
screen for card
authentication
Restart behavior 1 0-1 SYS 0: Automatically restarted
when the out of
paper is solved
(bypass feeding)
E-mail address 1 0-1 SYS Switches the display setting of the [INPUT @] button.
direct input button
Switchover of pop- 1 0-1 SYS Switches the pop-up display during scanning
up display during
scanning
Oki Data CONFIDENTIAL
Contents
for user cannot be obtained from the server when setting
the Home Directory for scanning. Use this code to disable
the pop-up display when the Home Directory cannot be
obtained depending on the user.
0: Displays the pop-up dialogue when user logs in
1: Displays the message in the guidance area when the
Scan to File screen is displayed
out is displayed when user or department logs out by
pressing [FUNCTION CLEAR] button twice or pressing
[ACCESS] button.
0: Logs out without displaying pop-up dialog
1: Displays pop-up dialog when logging out
1: Displayed (From Address can be edited)
accessed from [USER FUNCTIONS] button is displayed
or not. Use this code to prohibit users from changing the
language displayed on the control panel. Administrators
can change the language.
0: Not displayed
1: Displayed
Status] screen. When "3: High level" is set for code 08-
8911, be sure to disable this setting.
0: Disabled
1: Enabled
card reader is displayed on the login screen when the
card authentication is enabled.
0: Disabled
1: Enabled
1: Restarted by pressing the [START] button
0: Not displayed
1: Displayed
0: Not displayed
1: Displayed
Proce-
dure
1
1
1
1
1
1
1
1
1
11-42 /