Table of Contents
Advertisement
G
ETTING STARTED
P
OWER SAVING MODE
If you do not use the machine for a while, it will enter the power saving mode to control
the power consumption of the device. To cancel or initiate power saving mode, press the
Power Save button on the control panel.
NOTE
If your machine is connected locally (via USB), when it transitions to Sleep
mode its status is viewed as off-line. To use the printer in this state, you must
press the Power Save button to exit sleep mode.
S
WITCHING OFF
If you have an SD card fitted, always follow the correct shutdown
procedure to ensure that no data is lost.
1.
Press the OK button on the control panel to enter the menu.
2.
Press the Menu down button and scroll to the Shutdown menu.
3.
Press the OK button.
4.
Press the OK button to execute.
5.
At the prompt, turn the power switch OFF.
CAUTION!
Introduction > 13
Advertisement
Table of Contents
