Hdd Fault Diagnosis - Oki MB760 Service Manual

6.2.2

HDD fault diagnosis

This code displays the HDD operation history, which is recorded in the HDD, on the control
panel. HDD failure can be diagnosed or predicted with the information displayed.
1. Display
The following screen is displayed with setting code 08-9065. You can also refer to the same
information by pressing the [ON/OFF] button while pressing [5] and [C] simultaneously and then
selecting "5. SMART Info".
- Items supported differ depending on the HDD manufacturer.
- "---" is displayed on the VALUE, NAV and Worst columns if items are not supported.
2. Usage
The combination of the values of ID=05 and c5 is used to diagnose whether or not the HDD
has a physical failure when HDD failure is suspected (service call F100 - F109 or F120 or F124
occurred).
Result
ID VALUE
05
c5
05 From 1 to 999
c5
05 Any value
c5 1 or more
05 Either one is at least
1000.
c5
05 All values are
displayed as "-------".
c5
45641001TH Rev.1
0 Low possibility of physical failure
0
Defective sector has been reassigned and HDD is
recovered.
0
High possibility of defective sector existence.
(There will be a possibility of physical failure depending
on the use of HDD.)
High possibility of physical failure
High possibility of physical failure (A HDD connector,
harness or SYS board may be one of the causes.)
Fig. 9-1
Description
Oki Data CONFIDENTIAL
Diagnosis
HDD replacement
is not required.
HDD replacement
is not required.
HDD replacement
is required.
HDD replacement
is recommended.
HDD replacement
is recommended.
6-11 /