Oki MB760 Service Manual page 42

• When a normal HDD is mounted
HDD Assist Mode
Current HDD type: SATA HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
2. Remove key
Remarks:
If the HDD type cannot be identified, "Unknown HDD" may appear on the screen.
Refer to  P. 5-54 " [F106_1] ADI-HDD error: HDD type detection error"
Note:
When "SATA HDD" (normal HDD) is displayed, items 1 and 2 are not selectable.
If you select any of 1 and 2 and press the [START] button, the error message below
appears.
HDD Assist Mode
Current HDD type: SATA HDD
Select number (1-2) and press START key
1. Revert factory initial status HDD
=>
2. Remove key
Operation Failed.
Press SoftPower Key to Switch Off
45641001TH Rev.1
System Firmware Version
Update Mode
Fig. 3-8
System Firmware Version
Update Mode
Fig. 3-9
Oki Data CONFIDENTIAL
: xxxx(x.x.x.x)
: 4c Mode
: xxxx(x.x.x.x)
: 4c Mode
3-19 /