Oki MB760 Service Manual page 318

05/ Sub
Mode Element
08 element
08 Setting System User Card reading
interface device
Mode
08 Setting System User Card reading
interface device
Mode
08 Setting System User Card reading
interface device
Mode
08 Setting System General List print USB
mode storage setting
08 Setting System General Real time log
mode notification
function
08 Setting System General Real time log
mode notification
function
08 Setting System General Real time log
Mode notification function
08 Setting System General
mode
45641001TH Rev.1
Sub-
Item Subitem Code
code
3502
3503
3504
3615
3623
3624
3626
3629
Default Acceptable
Details RAM
value value
Card reader format 0 0- SYS The data of the block number in the noncontact IC is set.
information -2
42949
67295
Card reader format 0 Refer to SYS Security key "KKKKKKKKKKKK" (12 digits)
information -3 contents
Card authentication 0 0-100 SYS LDAP server number for the card authentication when a
LDAP server
List print USB 0 0-1 SYS 0: Enable (USB storage available)
storage setting
Job filtering setting 0 0-65535 SYS Changes the target type of jobs for notification in real
Log item filtering 21474 0- SYS Changes the target type of logs for notification in real
setting 83921
42949
67295
Department 0 0-1 SYS Sets whether the department information (number, name,
information
transmission
setting
Enable/Disable 1 0-1 SYS 0: Disabled
setting of standard
EWB function
Oki Data CONFIDENTIAL
Contents
KP-2003: <PPQRSSTU (hexadecimal number)>
PP: 1st block
Q: 1st block beginning byte
R: 1st block ending byte
SS: 2nd block
T: 2nd block beginning byte
U: 2nd block ending byte
KP-2005: <RRBSEbse (hexadecimal number)>
RR: 00 (Fixed)
B: 1st area block number
S: 1st area beginning byte offset
E: 1st area ending byte offset
b: 2nd area block number
s: 2nd area beginning byte offset
e: 2nd area ending byte offset
* If the 2nd block/area is not used, set the SSTU to "FFFF"
(hexadecimal number), the bse to"FFF" (hexadecimal
number).
<hexadecimal number> in the [Key Information] of the
[Sector Number] set in the code 08-3501 should be entered.
<Acceptable value>
0-0xFFFFFFFFFFFFFFFF
noncontact IC card is used should be set.
1: Disable (USB storage not available)
time log notification function.
time log notification function.
code) is transmitted or not in the real time log notification
function.
0: Department number, department name, department
code
1: Department number, department name
1: Enabled
Proce-
dure
5
5
1
1
1
5
1
1
11-20 /