Notices - Oki MB760 Service Manual

10.3 Notices

10.3.1 Setting code
Each signal will be enabled by configuring the setting code "08-9016" (Counter installed
externally).
08-9016
0: No external counter (Default)
1: Coin controller
5: Coin controller supporting ACS
10.3.2 Setting value change and restrictions when using the coin controller
1. Setting value
- 08-9016 (Counter installed externally): Set to "1" (Coin controller). The coin controller
supporting ACS (Auto Color Selection) can be connected by setting to "5" (Coin controller
supporting ACS/ mixed-size). However, operation is not guaranteed unless the specification
for the ACS timing is met.
- 08-9017 (Setting for counter installed externally): It should be charged precisely according
to the usage.
Example: To charge only when copies are made, set to "1".
- 08-6011 (Definition setting of large sized paper):
- Setting value "0": Set this value to regard A3, LD, undefined, and custom size that
- Setting value "1": Set this value to regard A3, LD, undefined, B4, Folio, 14"LG, 13.5"LG,
- Setting value "2": Set this value to regard B4 and custom size that exceeds 325 mm as
45641001TH Rev.1
exceeds 415 mm as large size.
13"LG, Computer and custom size that exceeds 325 mm as large size.
large size.
Oki Data CONFIDENTIAL
10-5 /