Oki MB760 Service Manual page 360

05/ Sub
Mode Element
08 element
08 Setting System Network Retention period
Mode
08 Setting System Network Retention period
Mode
08 Setting System Network E-mail
Mode
08 Setting System Electronic
mode filing
08 Setting System User When judging as
mode interface black in the ACS
Mode
08 Setting System Electronic
mode filing
08 Setting System HDD
Mode
08 Setting System Scanning E-mail
mode
08 Setting System Scanning E-mail
mode
45641001TH Rev.1
Sub-
Item Subitem Code
code
9193
9200
9201
9203
9204
9207
9208
9209
9210
Default Acceptable
Details RAM
value value
Web data retention 10 0-999 SYS When a certain period of time has passed without
period
File retention 30 0-999 SYS 0: No limits
period
Max. size in email/ 30 2-100 SYS 2 to 100 M bytes
InternetFAX
transmission
e-Filing document 1 0-1 SYS Sets the file retention level during edition in e-Filing
guarantee mode
Binarizing level 3 1-5 SYS 1: Step -2
selection
Default setting of 0 0-999 SYS Sets the data retention period when creating a user box.
user box retention
period
Warning 90 0-100 SYS Sets the percentage of HDD partition filled when warning
notification- File
Share/e-Filling
Notification setting 3 0-99 SYS Sets the days left the notification of E-mail saving time
of E-mail saving
time limit
Default setting of 0 0-6 SYS Sets the default value for the partial size of E-mail to be
partial size when
transmitting E-mail
Oki Data CONFIDENTIAL
Contents
operation after accessing Web Page, the data being
registered is automatically reset. This period is set at this
code.
(Unit: minute)
1 to 999: 1 to 999 days
(when the document cut/save command is used)
0: Not retained (Documents could be lost due to We
session timeout / electricity cutoff during document cut/
save.)
1: Full retained - Documents are retained until cut/save
command completion.
When "1" is set, documents are not lost even if disk full
occurs during command execution.
2: Step -1
3: Step 0 (center)
4: Step 1
5: Step 2
The binarizing level of each step is set at 08-9230.
0: Not deleted
1 to 999: Retention period (Unit: Day)
notification is sent.
0 to 100: 0 to 100%
* Checks the remaining amount of HDD with the
searching interval set at 08-9225.
limit appears
0 to 99: 0 to 99 days
transmitted when creating a template.
0: Not divided
1: 64 2: 128
3: 256 4: 512
5: 1024
6: 2048 (Unit: KB)
Proce-
dure
1
1
1
1
1
1
1
1
1
11-62 /