Oki MB760 Service Manual page 337

05/ Sub
Mode Element
08 element
08 Setting System Network Prioritized
Mode authentication
server
08 Setting System Network Prioritized
Mode authentication
server
08 Setting System Network Prioritized
Mode authentication
server
08 Setting System User
Mode interface
08 Setting System User
Mode interface
08 Setting System User
Mode interface
08 Setting System User
mode interface
08 Setting System FAX
Mode
08 Setting System User
mode interface
45641001TH Rev.1
Sub-
Item Subitem Code
code
8608
8609
8610
8622
8623 0
8624
8628
8631
8640
Default Acceptable
Details RAM
value value
Windows 0 0-100 SYS Sets the prioritized authentication server to be searched (0
LDAP 0 0-100 SYS Sets the prioritized authentication server to be searched (0
Card 0 0-100 SYS Sets the prioritized authentication server to be searched (0
Date and time 1 0-1 SYS 0: Not added
addition setting to
file name of scan
to file/e-mail
RIP function 1 0-1 SYS Enables/Disables the function related to Excel boarder
setting
Switchover of 3 0-3 SYS Switches the display method of filename.
filename display
method
Job operation 0 0-1 SYS This setting enables user to move from the COPY screen
on the COPY
screen when the
coin controller is
connected
Filename creation 0 0-1 SYS 0: Use address name (family-name/first-name) as
at fax reception
and forwarding
Job build operation 0 0-1 SYS This setting enables user to use the job build function
when the coin
controller is
connected
Oki Data CONFIDENTIAL
Contents
to 100). The servers displayed on the screen accessed by
Web Page -> Administration -> Maintenance -> Directory
Service are numbered beginning at the top (0 to 100).
to 100). The servers displayed on the screen accessed by
Web Page -> Administration -> Maintenance -> Directory
Service are numbered beginning at the top (0 to 100).
to 100). The servers displayed on the screen accessed by
Web Page -> Administration -> Maintenance -> Directory
Service are numbered beginning at the top (0 to 100).
1: Added
rendering of PCL6. The function is to prevent missing
lines when scaling down and inconsistent line width when
scaling up.
0: Disabled (No correction. Compliant with PCL6 language)
1: Enabled
0: Displays the filename from the beginning
1: Displays the trailing characters
2: Displays the beginning and trailing characters
3: Displays the filename without abbreviation
to JOB STATUS screen, and then operate jobs during
printing when the coin controller is connected. This code
is valid when the value of 08-9016 is "1".
0: Disabled
1: Enabled
filename if multiple names are found by address book
search of TSI (sender information).
1: Use address name (family-name/first-name) as
filename only when single name is found by address
book search of TSI (sender information).
when the coin controller is connected. This code is valid
when the value of 08-9016 is "1".
0: Disabled
1: Enabled
Proce-
dure
1
1
1
1
4
1
1
1
1
11-39 /