Oki MB760 Service Manual page 334

05/ Sub
Mode Element
08 element
08 Setting Image Image FAX (black)
mode Processing
08 Setting Image Image FAX (black)
mode Processing
08 Setting Image User User custom mode
mode Processing interface setting
08 Setting System General
mode
08 Setting System General Wide A4 Mode (for
mode PCL)
08 Setting System General
mode
08 Setting System General
mode
08 Setting System General Outside erase
mode Judgment
threshold (Default)
08 Setting System General Outside erase
mode Judgment
threshold (Default)
08 Setting System General
mode
08 Setting System General
mode
08 Setting System General
mode
45641001TH Rev.1
Sub-
Item Subitem Code
code
Image quality 7501 0
switchover
Image quality 7501 1
switchover
NW SCN 8303
8504
PRT 8511
8512
8514
8515
8516
8517
8518
8519
Default Acceptable
Details RAM
value value
Primary scanning 1 0-1 SYS 0: Suppresses graininess
direction
Secondary 1 0-1 SYS 0: Suppresses graininess
scanning direction
Color 0 0-4 SYS 0: Unused
Feeding method of 0 0-1 SYS 0: One side
odd page number
in duplex printing
(Raw print)
Wide A4 Mode (for 0 0-1 SYS 0: Disable
PCL)
Number of jobs in 10 2-10 SYS 2-10: From 2 to jobs can be specified
batch processing
Threshold value 20 5-30 SYS This code is used for changing the range in which non-
setting for RIP
standard paper
judgment
PPC 0 -3-3 SYS The larger the value, area to be erased increases. The
SCN 0 -3-3 SYS The larger the value, area to be erased increases. The
Remote Scan User 1 0-1 SYS 0: OFF
authentication
automatic login
Overwriting mode 0 0-3 SYS 0: Always OFF
for scanned files
Scan PDF file 1 0-1 SYS 0: Equivalent to scan image size
Paper size
Oki Data CONFIDENTIAL
Contents
1: Suppresses smudge
1: Dimensional accuracy priority
1: Text/Photo base
2: Text base
3: Photo base
4: e-document base
* e-document: This is the mode that corresponds to the
law in Japan. This mode is used to clarify area where
changes were made with such as a correction fluid.
1: Both sides
1: Enable
standard paper sizes are judged as standard ones. If the
page size data are within the standard paper size ± the
setting value, the page size is judged as a standard paper
size in PS/PDF printing. If the page size data are out of
the range, the page size is judged as a non-standard
paper size. The unit for the setting value is PS points. 1
PS point is approx. 0.35 mm.
smaller the value, area to be erased decreases.
smaller the value, area to be erased decreases.
(A user always enters manually (current method))
1: ON
(Previous authentication information will be used)
1: Meta Scan function ON / Normal scan function OFF
2: Meta Scan function OFF / Normal scan function ON
3: Always ON
1: Fitted into any standard size
Proce-
dure
4
4
1
1
1
1
1
1
1
1
1
1
11-36 /