Oki MB760 Service Manual page 25

Note:
Do not enter any of the modes shown below since they are provided only for production. If you
do so, the equipment may not be restarted.
[2]+[CLEAR]+[POWER]
[7]+[CLEAR]+[POWER]
[8]+[CLEAR]+[POWER]
[9]+[CLEAR]+[POWER]
[D] state transition diagram of self-diagnosis modes
*1 If you have used a self-diagnostic mode, turn the power OFF before the customer starts using
the equipment
*2 Mode shown in the table "[C] List of modes"
[e] about each mode
• Control panel check mode (01)
Operation procedure
[0][1]
[POWER]
Notes:
• A mode can be cancelled by [POWER] OFF/ON when the LED is lit and the LCD is blinking.
• Button Check
Buttons with LED: Press to turn OFF the LED.
Buttons without LED: Press to display the message on the control panel.
Button on touch panel: Press to display the initial screen displayed at power-ON. Press
[execution] on the touch panel and then the [CLEAR] button on the control panel. The
screen then returns to the Button Check menu.
45641001TH Rev.1
[POWER]
Normal
ON
Warming up
Ready
[POWER]
OFF
*1
To user
Fig. 3-1
LED lit/
[START]
LCD blinking
[START]
Self-diagnosis
mode
Authentication
screen
Each mode
*2
[POWER] OFF/ON
(Button check)
Oki Data CONFIDENTIAL
(Exit)
3-2 /