Oki MB760 Service Manual page 364

05/ Sub
Mode Element
08 element
08 Setting System Image Binarizing level
mode setting (When
judging as black in
the ACS Mode)
08 Setting System Scanning
mode
08 Setting System User Default screen
mode interface setting
08 Setting System Data
mode overwrite
enabler
08 Setting System User
mode interface
45641001TH Rev.1
Sub-
Item Subitem Code
code
9230 4
9233
9236
9240
9251
Default Acceptable
Details RAM
value value
Step +2 235 0-255 SYS Sets the binarizing level of each step.
Equipment name 0 0-2 SYS Sets whether or not adding the equipment name and user
and user name
setting to
a folder when
saving files
Default setting of 1 1-4 SYS 1: Private print screen (Job list of log-in user is displayed
print screen
HDD data 3 0-3 SYS Select the type of the overwriting level for deleting
overwriting type
setting
Access code entry 0 0-1 SYS 0: Renewed automatically
for Electronic Filing
printing
Oki Data CONFIDENTIAL
Contents
When the value increases, the image becomes darker.
When the value decreases, the image becomes lighter.
Refer to 08-9204.
name to the folder when saving files.
0: Not added
1: Add the equipment name
2: Add the user name
if user authentication is enabled.)
2: Hold print screen (Job list of log-in user is displayed if
user authentication is enabled.)
3: Private print screen (If the private print screen is
displayed when user authentication is enabled, user
list is displayed if user logs in as GUEST, and job list of
log-in user is displayed if user logs in as general user.)
4: Hold print screen (If the private print screen is
displayed when user authentication is enabled, user
list is displayed if user logs in as GUEST, and job list of
log-in user is displayed if user logs in as general user.)
* If user data department management (08-9264) is
changed from OFF to ON, the value in this code changes
from "1" to "2", and "3" to "4". The value does not change
if it is "2" or"4". Reset this value as necessary when
changing user data department management (08-9264)
from OFF to ON.
HDD data. (This setting is enabled only when the GP-
1070 is installed.)
0: LOW
Standard overwriting method.
1: MEDIUM
More secure overwriting method than LOW. The
overwriting time is between LOW and HIGH.
2: HIGH
The most secure overwriting method. The overwriting time
is the longest.
3: SIMPLE
Simple overwriting method. The time for overwriting is the
shortest.
1: Enter every time
Proce-
dure
4
1
1
1
1
11-66 /