Oki MB760 Service Manual page 312

05/ Sub
Mode Element
08 element
05 Adjustment Image Stroke
mode Processing adjustment
05 Adjustment Image Stroke
mode Processing adjustment
05 Adjustment Image Stroke
Processing adjustment
mode
45641001TH Rev.1
Item Subitem Code
PS/PDF automatic 600dpi 8239
stroke adjustment
PS/PDF automatic 1200dpi 8239
stroke adjustment
PS/PDF automatic 1200dpi 8239
stroke adjustment
Sub- Default Acceptable
Details
code value value
1 Minimum stroke 1 1-2
width when
disabled
2 Default setting 1 0-3
3 Minimum stroke 1 1-2
width when
disabled
Oki Data CONFIDENTIAL
RAM Contents
SYS This code is used to change the width of fine
lines in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets the minimum width of fine lines
when the automatic stroke adjustment is disabled.
For example, if automatic stroke adjustment is
disabled and the width of fine lines is set to "0" in
the PS command, the width of the lines becomes
1 dot if the value of this code is set to "1"; equally,
if it is set to "2", the width of the lines becomes 2
dots.
1: 1 dot
2: 2 dots
SYS This code is used to change the width of fine
lines in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets whether automatic stroke
adjustment is enabled or disabled if it is not
included in the print data. If this setting is disabled,
there will be an increase in cases in which the
width of fine lines becomes thicker by 1 dot when
they are printed.
0: Disabled
1: Enabled
2: Forcibly disabled (Ignores command in printing
data)
3: Forcibly enabled (Ignores command in printing
data)
SYS This code is used to change the width of fine
lines in PS and PDF printing. Automatic stroke
adjustment is the function that prevents the width
from changing according to the position.
This code sets the minimum width of fine lines
when the automatic stroke adjustment is disabled.
For example, if automatic stroke adjustment is
disabled and the width of fine lines is set to "0" in
the PS command, the width of the lines becomes
1 dot if the value of this code is set to "1"; equally,
if it is set to "2", the width of the lines becomes 2
dots.
1: 1 dot
2: 2 dots
Proce-
dure
4
4
4
11-14 /