Oki MB760 Service Manual page 339

05/ Sub
Mode Element
08 element
08 Setting System User
Mode interface
08 Setting System User
Mode interface
08 Setting System User Service notification
Mode interface information
08 Setting System General
Mode
08 Setting System User
Mode interface
08 Setting System Network
Mode
08 Setting System User
Mode interface
08 Setting System FAX
Mode
45641001TH Rev.1
Sub-
Item Subitem Code
code
8712
8713
8715
8717
8718
8719
8720
8721
Default Acceptable
Details RAM
value value
Display setting of 1 0-1 SYS Sets whether the drawer button in USER FUNCTIONS
the drawer setting
button
Setting of web 1 0-1 SYS Sets whether the web upload and web printing function is
upload/web
printing
Password for zip #10481 - SYS Password for zip file with password of service notification
file with password 09
Shutdown when 0 0-1 SYS Sets the operation when the power button is pressed for a
Super Sleep is
enabled
Selection for 0 0-17 SYS Use this code to shorten the time to switch the function on
caching the screen
of control panel at
start-up
MTU setting 1500 576-1500 NIC Normally there's no need to change the MTU value.
of network
communication
Department 0 0-1 SYS 0: Displays department code with asterisk when inputting
code display with
asterisk
Automatic FAX 0 0-1 SYS Sets whether the job is sent or canceled when AutoClear
sending at
AutoClear when
scanning original
put on the glass
Oki Data CONFIDENTIAL
Contents
is displayed or not.
0: Not displayed
1: Displayed
enabled or disabled.
- Web upload is a function which uploads the image data
created on the equipment to the web page displayed on
EWB.
- Web printing is a function which prints the web page
displayed on EWB or the PDF file included in the web
page displayed on EWB.
0: Disabled
1: Enabled
information.
Minimum number of digits: 0, maximum number of digits:
20
Available character: alphanumeric characters and
symbols
few seconds if Super Sleep is enabled.
0: Hibernation 1: Super Sleep
the control panel for the first time immediately after start-
up. However, the start-up time becomes longer (about 1 to
3 seconds per screen). When selecting multiple screens,
enter the total value.
0: Disabled
1: Copy
16: Fax
However, set the proper MTU value when MFP is
connected to the Internet using broadband router and so
on.
it.
1: Displays department code as it is when inputting it.
is executed on the interruption screen to confirm the next
original displayed after scanning the original put on the
glass. Use this code to cancel job when the equipment is
left unattended while the interruption screen is displayed.
0: Sends job
1: Cancels job
Proce-
dure
1
1
11
1
1
12
1
1
11-41 /