Replacing The Side Panel Supports; Replacing The Clothing Protector Lip; Adjusting The Side Panels; Adjusting The "Standard" And "Clothing Protector" Side Panels - Otto Bock Voyager Evo Service Manual

Service Work

3.8.2 Replacing the Side Panel Supports

Rear Side Panel Supports
1) Loosen the Allen head screws at the rear (see Fig. 42, item 2).
2) Secure the spring on the Allen head screw or reinstall if needed (see Fig. 43, item 1).
3) Replace the side panel supports at the rear.
4) Retighten the Allen head screws at the rear.
Front Side Panel Supports
1) Loosen the Allen head screws at the front (see Fig. 42, item 3).
2) Replace the side panel supports at the front.
3) Retighten the Allen head screws at the front.

3.8.3 Replacing the Clothing Protector Lip

1) Remove the seat pad.
2) Remove the rear wheels (see Page 24).
3) Loosen the Allen head screws (see Fig. 44, item 1).
4) Replace the clothing protector lip.
5) Use care to firmly tighten the Allen head screws (see Fig. 44, item 1).
6) Install the rear wheels (see Page 24).
7) Install the seat pad.

3.8.4 Adjusting the Side Panels

3.8.4.1 Adjusting the "Standard" and "Clothing Protector" Side Panels

After adjusting the rear wheel position or backrest, the position of the side panels needs to be checked and may
have to be adapted.
Adjusting the Side Panel Depth
1) Loosen the Allen head screws between the side panel and side panel bracket (see Fig. 45, item 1).
20 | Ottobock
42
44
43
Voyager evo