General Safety Instructions; Safety Instructions For Assembly; Nameplate - Otto Bock Start M1 Instructions For Use Manual

Safety
Warning regarding possible technical damage.
NOTICE

3.2 General safety instructions

WARNING
Lack of instruction
Tipping over, falling of the user due to lack of knowledge
► Instruct the user or the attendant in the proper use of the product when handing it over.
CAUTION
Use of unsuitable tools
Pinching, crushing or damaging the product due to use of unsuitable tools
► When completing the tasks, only use tools that are suitable for the conditions at the place of work and for
which safety and the protection of health are assured with proper use.
► Observe the specifications in the section "Required Tools".
NOTICE
Tipping or falling of the product
Damage to product due to lack of attachment
► When you work on the product, secure it so that it cannot tip over or fall over.
► Use a clamping fixture to secure the product whenever you work on it at a workbench.
NOTICE
Use of unsuitable packaging
Damage to the product caused by transportation using incorrect packaging
► Use only the original packaging for delivery of the product.

3.3 Safety Instructions for Assembly

WARNING
Changed diameter/installation position of the wheels
Tipping, falling over of the user due to blocked wheels
► Modification of the size and position of the front wheels and of the drive wheel size can lead to wobbling of the
front wheels at higher speeds. If changes are required, verify the horizontal alignment of the wheelchair frame
(see the section "Adjusting the drive wheels", "Adjusting the caster wheels").
WARNING
Improper assembly of removable wheels
Tipping, falling over of the user due to wheels coming off
► After each assembly, verify the proper fit of the removable wheels. The quick-release axles must be firmly
locked in the wheel attachment.

3.4 Nameplate

The nameplates are found on the crossbrace.
Label
6
A Manufacturer's product name
B CE marking
C Maximum load (see section "Technical data")
D Manufacturer information/address
E Serial number 1)
F Manufacturing date 2)
G Manufacturer's article number for the product variant
Meaning
Start M1