Ringing Tone; Stutter Tone - Panasonic KX-UTG200 Setup Manual

4.6.6 Tone Settings
Default Value
Configuration File Reference

4.6.6.3 Ringing Tone

Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
Tone Timings
Description
Value Range
Default Value
Configuration File Reference

4.6.6.4 Stutter Tone

Tone Frequencies
Description
Value Range
Default Value
Configuration File Reference
160 Administrator Guide
60,500,440
BUSY_TONE_TIMING (Page 304)
Specifies the dual-tone frequencies, in hertz, of ringback tones using 2
whole numbers separated by a comma.
1–9 characters
0, 200–2000 (0: No tone)
440,480
RINGBACK_TONE_FRQ (Page 304)
Specifies the pattern, in milliseconds, of ringback tones using up to 10
whole numbers (off 1, on 1, off 2, on 2...) separated by commas.
Note
•
It is recommended that you set a value of 60 milliseconds or
more for the first value (off 1).
1–60 characters
0–16000 (0: Infinite time)
Note
•
Avoid setting 1–50 for any of the values.
60,2000,3940
RINGBACK_TONE_TIMING (Page 305)
Specifies the dual-tone frequencies, in hertz, of stutter dial tones to
notify that a voice mail is waiting, using 2 whole numbers separated by
a comma.
1–9 characters
0, 200–2000 (0: No tone)
350,440
DIAL_TONE4_FRQ (Page 305)
Document Version 2015-01